BoomToneDJ TRAVELSOUND15-VHF Modo De Empleo página 9

24. XLR line out to another speaker with XLR line in
25. Main power switch
26. Charge switch (for charging the battery)
27. Current input AC IN 100-240VAC 50/60Hz
28. 12V external battery interface (for connecting a 12V battery)
HOW TO USE
1- Before first use, fully charge the battery (a 10-hour cycle is recommended).
2- Connect your source to the speaker. (Make sure all devices are turned off when
making connections).
3- Turn on your source (CD player, mixer, etc.).
4- Check that all the levels of your speaker are at minimum, then turn on the speaker.
5- Depending on the source connected, gradually raise the corresponding
potentiometer as well as the MASTER level (6).
When you store your speaker, be sure to fully charge the battery before storing it.
The battery is guaranteed for 6 months.
TWS MODE
The TWS mode allows the use of 2 TRAVELSOUND15-VHF speakers in stereo bluetooth.
You must have 2 identical speakers for this.
1. Put the 2 speakers in Bluetooth mode (5)
2. On one of the 2 speakers, press and hold the TWS button on the MP3 module (5). The
both speakers are now paired.
3. Connect via Bluetooth to the speaker.
INSTALLATION
Never install and use this device near a source of humidity: swimming pool or wet
ground. Do not expose this equipment to rain and ensure that no object containing a
liquid, a vase for example, is placed on the device.
Do not install near a source of heat such as a heater, a hot-air vent, or quite other device
loosening of the heat, notably the amplifiers.
The speaker can be placed on 35mm tube or speakers stands.
WIRELESS MIC
9