RiverRidge 06-185 Instrucciones De Ensamblaje página 9

STEP 4
1. Insert 2 wood dowels (D) into wood dowel holes on lower left side panel (7).
2. Attach bottom board (6) to lower left side panel (7) by inserting wood dowels (D) into wood
dowel holes and inserting cam bolts (A) into cam lock holes on bottom board (6).
3. Insert 2 cam locks (B) into cam lock holes on bottom board (6), then rotate clockwise to
secure cam bolts in place.
4. Insert 2 wood dowels (D) into wood dowel holes on lower right side panel (8).
5. Attach lower right side panel (8) to bottom board (6) by inserting wood dowels (D) into wood
dowel holes and inserting cam bolts (A) into cam lock holes on bottom board (6).
6. Insert 2 cam locks (B) into cam lock holes on bottom board (6), then rotate clockwise to
secure cam bolts in place.
STEP 5
1. Insert 4 wood dowels (D) into wood dowel holes on top board (1).
2. Attach top board (1) to upper left side panel (2) and upper right side panel (3) by inserting
wood dowels (D) into wood dowel holes and inserting cam bolts (A) into cam lock holes on
upper left side panel (2) and upper right side panel (3).
3. Insert 4 cam locks (B) into cam lock holes on upper left side panel (2) and upper right side
panel (3), then rotate clockwise to secure cam bolts in place.
4. Insert 4 long wood dowels (M) into wood dowel holes on middle connection board (5).
5. Attach middle connection board (5) to upper left side panel (2) and upper right side panel (3)
by inserting long wood dowels (M) into wood dowel holes on upper left side panel (2) and
upper right side panel (3).
6. Insert 4 screws (C) through holes on middle connection board (5), then tighten to upper left
side panel (2) and upper right side panel (3).
7
1
D
B
B
D
D
B
D
B
2
8
D
B
D
B
D
B
D
B
6
3
M
M
M
M
C
C
C
5
C