INVENTOR FS403W Manual Del Propietário página 8

MAINTENANCE INSTRUCTION
This fan requires limited maintenance. Do not attempt to fix on your own. Always refer to
qualified personnel if any service is required.
1. Prior to cleaning and assembling, the fan must be unplugged.
2. To ensure adequate air circulation to the fan's motor, vents at the rear of the fan motor should
be free of dust at all times. Do not disassemble the fan in order to remove the dust.
3. The exterior parts of the device may be wiped with a soft and damp (with a mild detergent)
cloth.
4. The use of any abrasive detergent or solvents, gasoline, or paint thinner for cleaning purposes
should be avoided as this may result in damaging the surface of the fan.
5. Water or any other liquids in the motor housing or interior parts of the fan must be avoided at
all times.
CLEANING
1. Prior to performing any cleaning the device must be unplugged.
2. All plastic parts of the device should be cleaned with a soft moist cloth and with mild soap.
Thoroughly clean any soap excess with a dry cloth.
All the pictures in the manual are for explanatory purposes only. The actual shape of the unit you
purchased may be slightly different, but the operations and functions are the same.
The company may not be held responsible for any misprinted information. The design and the
specifications of the product for reasons, such as product improvement, are subject to change
without any prior notice.
Please consult with the manufacturer at +30 211 300 3300 or with the Sales agency for further
details. Any future updates to the manual will be uploaded to the service website, and it is advised
to always check for the latest version.
Scan here to download the latest version of this manual.
8
ΕΝ
www.inventorappliances.com/manuals