Power Saving - i-box Podium2 Manual De Instrucciones

Power Saving

If there is no Bluetooth audio input for 5 minutes your Podium 2 speaker will
automatically power off.
AUX IN connection and operation
For audio sources without Bluetooth capability you can connect via the 3.5mm AUX
IN socket (9) on the back of the Podium 2.
1. Use the 3.5mm audio lead supplied to connect an audio source to the AUX IN
socket (9). On connection you will hear an audio message, "AUX mode" and the
Power/Mode LED (7) will be lit a constant Red.
2. Select and play tracks using the controls on your audio source.
3. Short press+/- (4/3) to increase or reduce the volume level. Press .ii (2) to mute
the sound (the track will continue to play).
When the aux lead is disconnected the Podium 2 will revert to Bluetooth mode.
干一 ITTn
延匡窃
二
Wi, 斗�,c妇屯mg
ON
IC?
OFF