Steinberg Systems SBS-CO-100 Manual De Instrucciones página 19

NOTE! The illustrations in this manual are for illustrative
purposes only and may differ in some details from the actual
product appearance.
The original version of the instructions is the German version.
versions are translations from German.
2. Use safety
NOTE! Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock,
fire and/or serious injury or death.
The term "device" or "product" in the warnings and instruction description
refers to the Thermo hygrometer with carbon dioxide
<
2.1. Electrical safety (concerns the power supply)
a) The device plug must fit into the socket. Do not modify the plug in any way.
Original plugs and matching sockets reduce the risk of electric shock.
b) Avoid touching earthed items such as tubes, radiators, heaters and
refrigerators. There is an increased risk of electric shock if your body is earthed
and touches the device exposed to direct rain, wet floor and humid
environment. If water penetrates into the device, there is an increased risk of
damage to the device and electric shock.
c) Do not touch the device with wet or damp hands.
d) Do not use the cable in a wrong way. Never use it to carry the device or to pull
the plug out of the socket. Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables increase the risk of electric
shock.
e) If you cannot avoid using the device in a wet environment, use a residual
current device (RCD). Using an RCD reduces the risk of electric shock.
f) Do not use the device if the power cable is damaged or shows clear signs of
wear. A damaged power cable should be replaced by a qualified electrician or
the manufacturer's service.
Other language
>.