Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The display panel will show 2 options:
•
PRE-PROGRAMS: one of the four pre-set schedules.
•
START PROGRAMMING: to set a personalised programming and change
the values of the COMFORT and ECO modes.
A flashing line will appear around the option that is selected. To change the option
use the
and
Start programming for AUTOMATIC function
To program the AUTOMATIC mode, see points above and ensure that START
PROGRAMMING is highlighted. Press the
panel will show a flashing screen.
STEP 1 - Select COMFORT mode temperature
COMFORT mode will be programmed first. Select the COMFORT mode
temperature between 19ºC and 30ºC using the
and the temperature will flash. Press the
STEP 2 - Select ECO mode temperature
ECO mode will be programmed next. Select the ECO mode temperature
between 7.5ºC and 18.5ºC. The
button to confirm.
STEP 3 - Select the Days
The days of the week will start flashing on the display panel and show as DAY 1,
DAY 2, DAY 3 etc.
Use the
and
Press
to select the day or days that you wish to include in your AUTOMATIC
program. The day will stop flashing once selected. Repeat for all the days you
wish to program and once all days are selected press the button
onto setting the hour.
20
buttons and press the
icon and the temperature will flash. Press the
buttons to move forwards or backwards through the days.
button to confirm.
button to access and the display
and
buttons. The
button to confirm.
icon
to move
Publicidad
Tabla de contenido
