Technical Service - EDM Product 08700 Manual De Instrucciones

▶Don't try to spread your hands too far. Keep your feet firmly on the
ground at all times. This will allow you to maintain control of the
ES
power tool in unexpected situations.
▶Dress appropriately. Do not wear loose clothing or jewelry. Keep your
hair, clothing, and gloves away from the power tool. Loose clothing,
PT
jewelry, or long hair can become entangled in moving parts.
▶If there are devices for connecting dust extraction and collection
facilities, make sure they are connected and used properly. Using
these devices can reduce dust-related hazards.
EN
USE AND CARE OF ELECTRICAL TOOLS
FR
▶Don't expect the power tool to do more than it can. Use the right
power tool for what you want to do. A power tool will perform better
and be safer if it is used in the context for which it was designed.
▶Do not use the power tool if the switch cannot turn it on and off. A
power tool with a broken switch is dangerous and must be repaired.
▶Disconnect plug from power source before making adjustments,
changing accessories, or storing power tools. These preventive safety
measures reduce the risk of accidentally starting the power tool.
▶Store power tools out of the reach of children when not in use and do
not allow anyone unfamiliar with the power tool or these instructions
to use the power tool. Power tools are potentially dangerous in the
hands of untrained people.
▶Take care of the maintenance of power tools. Check for misalignment
or binding of moving parts, breakage of parts, and other conditions
that may affect the power tool's operation. If the power tool is
damaged, take it in for repair before using it. Many accidents are
caused by poor maintenance of power tools.
▶Keep cutting tools sharp and clean. Cutting tools with sharp edges
are less likely to jam and are easier to control.
▶Use the power tool, accessories and tool tips, etc. in accordance with
these instructions, taking into account the working conditions and
the work to be carried out. Using the power tool for operations other
than those intended could result in a hazardous situation.

TECHNICAL SERVICE

Your power tool should be serviced by a qualified specialist using only
standard replacement parts. This will ensure that it meets the required
security standards.
▶Use only replacement parts and accessories recommended by the
manufacturer.
Instruction manual
12
ref. 08700