StetSom IRON Serie Manual De Usuario página 19

HIGH INPUT diagram
Use the RCA and HIGH INPUT connections at the same time can cause unwanted
noise and amplifier problems.
Speakers installation
Use example:
4 x SPEAKERS 2 OHMS
2 x SPEAKERS 2 OHMS +
1 x SUBWOOFER 4 OHMS (BRIDGE)
2 x SUBWOOFER 4 OHMS (BRIDGE)
SPEAKERS
13 AWG cables
Check the minimum impedance
supported by the amplifier.
NO NEED TO BE CONNECTED
GRAY WIRE
CH4 CH3
BLUE WIRE
19
CH2 CH1
STEREO MODE
2 OHMS min.
BRIDGE MODE
4 OHMS min.