Tyrolit HGE125 Instrucciones De Funcionamiento Originales página 17

HGE125
5 Safety Instructions
.
Safe work with the machine is only possible if you read this operating instruction completely
and follow the instructions contained strictly.
Additionally, the general safety instructions of the leaflet supplied with the tool must be
observed.
Prior to the first use, the user should absolve a practical training.
.
If the mains cable gets damaged or cut during the use, do not touch it, but instantly pull the plug out
of the socket. Never use the tool with a damaged mains cable.
.
The tool must neither be wet nor used in humid environment.
.
Do not use the tool in an environment with danger of explosion.
.
Do not drill into asbestos-containing materials.
.
Modifications of the tool are prohibited.
.
Never use the machine without a dust guard.
Use the machine with partly removed dust guard in corners only.
For other applications the dust guard must always be closed.
.
Always check the tool, cable and plug before use. Have damages only repaired by
specialists. Insert the plug into the socket only when the tool switch is off.
.
When you work outside, the machine has to be used with a fault-current circuit breaker with max.
30 mA.
.
The machine should only work under supervision of somebody. Plug and switch the machine off if it is
not under supervision, in case of putting up and stripping down the machine, in case of voltage drop or
when fixing or mounting an accessory.
.
Switch the machine off if it stops for whatever reason. You avoid that it starts suddenly and not
under supervision.
.
Do not use the machine if a part of the housing is damaged or in case of damages on the switch,
the cable or plug.
.
Pay attention that the speed indicated on the grinding wheel meets or is higher than the max. speed
indicated on the machine.
.
Grinding wheels have to be stored and used carefully according to the instructions of the producer.
.
Check the accessories before use. Do not use any products which are broken, cracked or damaged in
another way.
en
17