Eu Declaration Of Conformity - Tyrolit HGE125 Instrucciones De Funcionamiento Originales

HGE 125
16 EU - Declaration of Conformity
We declare under our sole responsibility that the product described under "Technical Data" is in conformity with the following
standards or standardization documents:
EN 60 745,EN 55014-1,EN 55014-2,EN 61000-3-2,EN 61000-3-3,EN IEC 63000
according to the provisions of the directives 2011/65/EU, 2014/30/EU, 2006/42/EG
Technical file (2006/42/EG) at:
TYROLIT Hydrostress CH
Witzbergstrasse 18
CH-8330 Pfäffikon
Switzerland
Pfäffikon, 10.03.2022
Roland Kägi
Operations + R & D Machines
GB - Declaration of Conformity
We declare as the manufacturer under our sole responsibility that the product described under
„Technical data" fulfills all the relevant provisions of the following Regulations S.I. 2012/3032
(as amended) and that the following designated standards have been used:
BS EN 60745, BS EN 55014-1, BS EN 55014-2, BS EN 50581,
BS EN 61000-3-2, BS EN 61000-3-3, BS EN IEC 63000
Technical file (S.I. 2008/1597) at:
TYROLIT Hydrostress CH
Witzbergstrasse 18
CH-8330 Pfäffikon
Switzerland
Pfäffikon, 10.03.2022
Roland Kägi
Operations + R & D Machines
Subject to change without notice.
en 23