Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION & INITIAL STARTUP
NOTE: Before installation, please inspect the unit. Be sure
that nothing inside the package is damaged.
Placement & Storage Conditions
Install the UPS in a protected area that is free of excessive
dust and has adequate air flow. Please place the UPS away
from other units at least 20 cm to avoid interference. Do
NOT operate the UPS where the temperature and humidity
is outside the specific limits. (Please check the specs for the
limitations.)
Connect to Utility and Charging
Plug in the AC input cord to the wall outlet. For the best
results, suggest to charge the battery at least 6 hours before
initial use. The unit charges its battery while connecting to
the utility.
Connect the Loads
Plug in the loads to output receptacles on the rear panel of
the UPS. Simply turn on the switch of UPS unit, then devices
connected to the UPS will be protected by UPS unit.
8
Publicidad
Tabla de contenido
