Safety Information; Preparation - Kobalt 19156 Instrucciones De Montaje

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble or operate this
product. Failure to follow may result in serious injury. Save all warnings and instructions for future
reference.
WARNING
• Do not stand or step on this product. You may fall which may cause personal injury or product
damage.
• When locking the product, close the drawers completely in order for the lock bars to work
properly.
• Lock wheels when the product is not being moved.
• Secure this product properly before moving it with a forklift.
• Do not attach or mount this product to a vehicle. This may cause personal injury or product
damage.
CAUTION
• Do not exceed the maximum drawer weight and total product weight, including contents. Always
balance the cabinet load to avoid tipping. Place the heavier weights on the bottom drawers when
possible.
• Be careful when opening more than one drawer. The product may become unstable and tip,
which may also cause personal injury or product damage.
• Keep the product on level surfaces. The product may become unstable and tip if stored or moved
on an unlevel surface, which may cause personal injury or product damage.
• Secure all items and lock all drawers before rolling this product. Only roll the product short
distances by using the handle provided.
• Two people are needed to safely move this unit.
• Do not store liquids in the unit unless they are secured in an approved container.
• Keep children and bystanders away while loading, unloading, and moving the product.
• Always use common sense and be cautious when using this product. Do not modify this product
in any way.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 15 minutes (does not include unpacking time)
Tools Required for Assembly (included): 10 mm Wrench, 14 mm Wrench
Tools Required for Assembly (not included): Adjustable wrench
5