Assembly Instructions - Kobalt 19156 Instrucciones De Montaje

ASSEMBLY INSTRUCTIONS

1. Attach the cabinet handle (C) to the
cabinet (A) using M6 x 20 mm bolts
(AA).
Note: The cabinet handle (C) can be
attached to either side of the cabinet (A),
but must match the end where the swivel
casters with brake (D) will be installed.
The holes in cabinet (A) are tapped and
do not require nuts.
Hardware Used
AA
M6 x 20 mm Bolt
2. Ensure all cabinet drawers are securely
locked into place using the lock (FF) and
key (GG) on the cabinet (A). Lay the
cabinet (A) on its back using the
cardboard package materials to protect
the finish. Mount the two swivel casters
with brake (D) to the cabinet (A) using M8
x 25 mm bolts (BB), spring washer (CC)
and washer (DD). Repeat this process for
the fixed casters (E) on the opposite side
of the cabinet (A). Return the cabinet (A)
to its upright position.
Note: Two people may be required to
complete this installation. The swivel casters
with brake (D) must be installed on the end of
the cabinet (A) with the cabinet handle (C).
Do not over tighten the screws.
Hardware Used
BB
M8 x 25 mm Bolt
Spring Washer
CC
1
x 4
2
E
DD
x 16 Washer
x 16
6
C
A
A
A
D
A
CC
x 16
AA
C
AA
D
DD
BB