SHINE reserve parachute's manual SHINE
7.
Lift the upper line to keep the folds tidied
up along the entire panels length, and the wind
channel unobstructed right up to the canopy's apex.
8.
Be certain for the upper and lower lines
to freely run from the canopy to the risers.
9.
S-fold the left side of the canopy under
the centre of the parachute, then S-fold the right
side of the canopy onto the centre of the chute.
Keep the canopy neatly folded in place using
sandbags or books.
10.
WARNING! Release the tension on
the canopy and
IMMEDIATELY REMOVE THE TIE
holding the folding loops together. Not confor-
ming to the described procedure would prevent
the parachute from opening! ( See check list ).
PACKING
11.
"S" fold the fabric.
12.
Place the pod at the top, then flip it all
upside down with the "S" folded parachute. Keep a
small space at the front of the parachute's leading
edge to later fold and tuck away the lines.
13.
Close the container's rear flap and
two lateral flaps..
SUP'AIR
_SHINE
Page 15