Fiberme FCM630A Guía De Instalación Rápida página 5

CONNECTING FCM630A:
FCM630A Rear view
LAN port
Reset
DC 12V
Heartbeat port
WAN port
FCM630A Front view
1. Connect one end of an RJ-45 Ethernet cable into the WAN port of the FC-
M630A.
2. Connect the other end of the Ethernet cable into the uplink port of an Ethernet
switch/hub.
3. Connect the 12V DC power adapter into the 12V DC power jack on the back
of the FCM630A. Insert the main plug of the power adapter into a surge-pro-
tected power outlet.
4. Wait for the FCM630A to boot up. The front LCD display will show the FCM's
hardware information when the boot process is completed.
5. Once the FCM630A is successfully connected to network via WAN port, press-
ing the "Home" button will allow you to get the IP address as well as other
information.
USING THE FCM630A LCD MENU:
1. Press "Settings" key to start browsing menu options.
2. Press "Navigation Key" to browse different menu options. Press "OK" to select
an entry.
3. In the menu option, select "Back" to go back to previous menu.
4. The LCD will return to default display after being idle in menu for longer than
30 seconds.
Ground
SD Card slot
USB port
~5~
CONFIGURING THE FCM630A VIA WEB
GUI:
1. Connect the computer to the same network as the FCM630A.
2. Ensure the FCM630A is properly powered on then press the "Home" button to
displays the IP address and other information on the LCD screen.
3. Open a web browser on the computer and enter the displayed IP address into
the search bar in the following format: http(s)://ipaddress:portnumber
4. Enter admin's username and password to access the configuration menu.
(The factory default username is "admin" while the default random password
can be found on the sticker at the back of the unit).
5. For more detailed information on how to configure SIP extensions, SIP trunks,
and other system settings via the web UI, please download the FCM630A user
manual here: https://www.fiberme.com/products/
Refer to online documents and FAQ for more detailed information:
https://www.fiberme.com/products/
~6~