Selecting Dab Mode; Selecting Dab Seek Mode - Kenwood KTC-9090DAB Manual De Instrucciones

broadcasting through the channel is called
an Ensemble (Ensemble provider),
providing more than one Service. The
Services include the Audio programme and
Data service.
Also, the Services include various Service
Information such as the Service Label
(name), network information, etc. For
example, information such as an RDS
station broadcasts is the same
programming as with the DAB services
provided.
Based on this data, when it is no longer
possible to receive the DAB, there will be
automatic switching to the RDS station
which will allow continued monitoring of
the Service.
❈ Programme organisation has been created
for descriptive purposes and differs from
actual broadcasts. Also note that
depending on time, the number of
programmes is subject to change.
Audio programme service
consist of;
• Audio Modes
There are three modes: stereo, joint
stereo , and single channel (e.g., mono).
• Sound Quality
There are a variety of levels which range
from sound quality on par with a
telephone to highquality sound at the
level of CD. There is also a mode that
cuts the sampling frequency in half to
raise the transfer efficiency.
Audio mode and sound quality are each
used to advantage in broadcasts
depending on the contents of the Service
(Audio programme). In addition, the textual
information (Dynamic Label) related to the
service (Audio programme) can be
transmitted.
Alarm announcement;
When an emergency programme is
broadcast in case of a disaster, all
functions are interrupted and switched to
the alarm announcement.
Downloaded from: http://www.usersmanualguide.com/

Selecting DAB Mode

Press the [SRC] button repeatedly until
DAB mode is obtained. "DAB" is
displayed when the DAB mode is
selected.
The DAB indicator lights whilst the DAB
mode.
NOTE
Refer to the Source mode page in each
manual for groups E and F.

Selecting DAB Seek Mode

Select the method how to select an
ensemble.
1
Display the menu mode using the
control unit and select a setting item.
2
Selecting Tuning Mode:
Switch the setting of the menu items.
"Seek Mode Auto 1"/"AUTO 1"/"AUTO":
Auto Ensemble Seek
"Seek Mode Auto 2"/"AUTO2":
Pre-set Service Call
"Seek Mode Manual"/"MANUAL":
Manual Seek
3
Exit from the menu mode.
E and F group
Touch [SEEK] to switch the Seek mode.
NOTE
• The same setting items are displayed in
each of the DAB mode and the TUNER
mode, but settings for the DAB source
are available from within the DAB mode
and settings for the TUNER source are
available from within the TUNER mode.
• As for D group, the Pre-set Service Call
of the AUTO2 cannot be set.
ABCDEFG
ABCDEFG
11