FONESTAR FO-22CAT8 Manual De Instrucciones página 2

EN
DESCRIPTION
- 1 x 4 HDMI extension distributor for Cat 6 / 6a / 7 cable.
- UHD resolution 4k @ 60Hz and lower.
- Bandwidth 18 Gbps.
- Transmission distance up to 60 m.
- HDMI loop output on local TV transmitter.
- Analog and digital audio extractor.
EDID function, manually select the optimal resolution of all TVs.
- Micro USB port for serial port update and control.
- PoC power of the receivers.
- According to IEEE-568B standard.
- Remote control extenders.
CONTROLS AND FUNCTIONS
TRASMITTER
1.- Transmitter on/off button.
2.- q: transmitter LED power indicator.
3.- IN: input source LED. This indicator will light up when it detects that there is a powered device connected
to the IN port on the rear panel.
4.- LOOP: LOOP OUT output LED. This indicator will light up when it detects that there is a powered device
connected to the LOOP OUT port on the rear panel.
5.- OUT 1~8: LEDs for the CAT OUTPUT outputs. This indicator will light up when it detects that there is a
powered device connected to the corresponding CAT OUTPUT port on the rear panel.
REAR
1.- COAX: digital audio output to connect an amplifier. RCA connector.
2.- L/R: analogue audio output to connect an amplifier. 3'5 mm stereo jack connector
3.- HDMI IN: signal inputs for connection of a DVD, PC, etc. HDMI connector.
4.- LOOP OUT: AV signal output for connecting TV, projectors, etc. HDMI connector.
5.- CAT OUTPUT: output connectors for the 8 supplied extenders/receivers. Use Cat 6/6a/7 cable for
connection..
- a: connection indicator between transmitter and receiver. Lights up when connected.
- b: signal indicator between transmitter and receiver. Lights up when signal transmission is
detected between them.
6.- IR OUT: outputs for connection of the IR emitter of the remote control.
7.- DC 12V: power supply connection for the supplied power adapter.
- 2 -