Kunft KDF 2377 Manual De Instrucciones página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

placed by the manufacturer or its service
agent.
• Do not allow the cord to hand over sharp
edges and keep it well away from hot ob-
jects and naked flames. Remove the plug
from the socket only by holding the plug.
• Make sure that there is no danger that the
cord or extension cord may inadvertently
be pulled or cause anyone to trip when in
use.
• If an extensive cord is used it must be sui-
ted to the power consumption of the ap-
pliance, otherwise overheating of the ex-
tension cord and /or plug may occur.
• Ensure the voltage used corresponds with
the voltage indicated on the rating label.
• Incorrect operation and improper use can
damage the appliance and cause injury to
the user.
• Never touch the blades with your fingers,
pencils or any other kind of objects, whe-
ther the appliance is operating or not.
• Never pull the power cord too hard. If it
gets damaged after prolonged use, have
it repaired by a qualified electrician or te-
chnician.
• Do not use the appliance in damp or wet
places, like bathrooms.
• Never allow the fan to get wet or that any
kind of liquid enters the motor or control
panel. However should the appliance ac-
cidentally fall into water, unplug the ap-
8
desk fan 23 cm
pliance immediately and have it checked
by a qualified person before using it again.
Non-observance could cause a fatal elec-
tric shock!
• Do not use the appliance with wet hands,
on a damp floor or when the appliance it-
self is wet.
• Do not touch the plug with wet or damp
hands.
• Never block the blades while the appliance
is operating.
• Never attempt to open the housing your-
self.
• Do not place any kind of object into the
inside of the housing.
• Do not hang or mount the fan on a wall or
ceiling.
• Place the fan on an even and steady sur-
face so it does not fall.
• Before using your fan, make sure it is com-
pletely and correctly mounted.
• To avoid damages in the cable, roll it wi-
thout any effort.
• After assembling the fan, make sure the
power cord is not stuck.
• Remove all the packaging materials (plas-
tic, cardboard, etc.).
• The packaging materials should not be left
for children to reach it or have access to
EN
KDF 2377 9"
9

Publicidad

Tabla de contenido
loading

Tabla de contenido