Utilization And Functioning; Product Description; Operating Instructions; Angle Adjustment - Kunft KDF 2377 Manual De Instrucciones

it. Keep all packaging materials away from
children as there is a risk of suffocation.
• This appliance is not suitable for commer-
cial use nor for use in the open air.
• The appliance may be used only for its in-
tended purpose. No responsibility can be
taken for any possible damage caused
through incorrect use or improper han-
dling.
• Never use the cord to carry the appliance.
Use the handle to carry the appliance.
• Never leave the appliance unattended whi-
le it is in use.
• Always remove the plug from the socket
when the appliance is not in use and each
time before it is cleaned.
• Nominal voltage is still present in the ap-
pliance as long as the appliance is con-
nected to the mains socket.
• No exchange will be made if the above ins-
tructions are not followed. Always test the
product first before purchase.
• If the ventilator is no longer required, store
it in a cool, dry place.
• Warning! After assembly, it's strictly forbi-
dden to remove the protective guards du-
ring maintenance or cleaning.
• Never use the fan without the guards in
place.
10
desk fan 23 cm
2. UTILIZATION AND
FUNCTIONING

2.1. Product Description

1. Front grill.
2. Fan blade.
3. Guard mounting nut.
4. Rear grill.
5. Motor shaft.
6. Motor housing.
7. Oscillation knob.
8. Neck piece assembly.
9. Stand.
10. Speed control switch (0, 1 and 2).

2.2. Operating Instructions

The On/Off and speed is controlled by the button switch.
0 - The fan is switched off.
1 - The fan operates at the lowest speed.
2 - The fan operates at the highest speed.

2.3. Angle Adjustment

1. Switch off the fan.
2. Slightly loosen the adjusting screw by turning it anti-clockwise.
3. Adjust the fan to the desired angle and then tighten the adjusting
screw by turning it clockwise.
EN
KDF 2377 9"
1 2 3 4 5 6 7
10
11
8
9