Led Indicators - Mastervolt Mate Pro 40 Manual Del Usuario Y De Instalación

LED indicators

LED
green
+
red 1 x blinking +
green solid on
red 1 x blinking
red 2 x blinking
red 3 x blinking
red 4 x blinking
red 5 x blinking
Meaning
Blinking: starting up
Solid on: on (electrical connection between A+ and B+).
Working with reduced charge current
Reduced charge current (resulting in extended charge time) to protect the
Charge Mate Pro. Most likely, this is due to long cable lengths. Check that the
cables are as short as possible, free from loops and run the positive and
negative wires as close as possible together.
Overvoltage
The voltage on A+ and/or B+ has been above 15.5/31 V for more than 1 s.
The warning disappears when voltage drops below 15/30 V for more than 10
s.
High voltage differential
A voltage differential between A+ and B+ has been detected of more than
8/16 V for more than 2.5 s. The warning disappears when the voltage
differential drops below 8/16 V for more than 2.5 s.
Temperature too high (75 °C / 167 °F)
This warning disappears when the temperature drops below 65 °C/ 149 °F.
Reverse current
Reverse current detected from B+ to A+ for more than 2s. Disappears after
20 s.
Installation error
Shut down to protect the Charge Mate Pro. Most likely, this is due to long
cable lengths. Check that the cables are as short as possible, free from loops
and run the positive and negative wires as close as possible together.
ENGLISH
7