EDM Product 07663 Manual De Instrucciones página 13

07663
REF.
MAINTENANCE AND CLEANING
- Before cleaning, unplug the appliance from the mains and remove the connector from the
base.
- Wait for the appliance to cool down to clean it. Always use a damp cloth or a sponge with a
little detergent. If there are still leftovers, pour a little water on the plate. Then carefully remove
the remaining food with a wooden or plastic spatula. In any case, always avoid water entering
the appliance.
- Do not immerse the appliance in water.
- After cleaning the appliance, dry it with a dry cloth.
- Always clean the thermostat with dry paper. The thermostat must always be dry, so never use
a damp cloth.
- In the event that the appliance is accidentally wet, make sure it is completely dry before
putting it into operation.
- Finally to improve the conversation of the iron, grease the surface with a cloth moistened with
a little oil.
- Do not use chemical or abrasive products, metal scouring pads, etc., that could damage the
coating.
- For your comfort and the consequent saving of space, you can store the device by placing it
in a vertical position, resting on the stops.
TECHNICAL SPECIFICATIONS
Non-stick surface
Adjustable temperature
Collection Tray-fats
Cold touch handles
Transportable to the table
Easy to clean
Power: 2,000W
Roast surface: 48 x 25cm
220 / 240V - 50Hz
WASTE
This symbol on the product or in the instructions
means that your electrical and electronic equipment
must be disposed at the end of its useful life in a
specialized container; Do not dispose it in the usual
household waste container. In the EU there is special
waste collection systems for subsequent recycling. For
more information, contact with the local authority or
the retailer from whom you purchased the product.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY DUE TO AN INCORRECT
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
THE INVOICE IS THE PRODUCT WARRANTY
INSTALLATION OF THE APPLIANCE.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
WARRANTY
The warranty period is 24 months from the date of
purchase and covers all manufacturer's failures
regarding material and quality. This warranty applies
only if the instructions for use have been followed, and
it is voided if the device has been forced or used
improperly, or if it has been repaired by an unauthori-
zed person.