Technical Data - Miele DES 6000 Instrucciones De Manejo Y Montaje

en - DES 6000
Installation
Please observe the illustrations with
regard to building-in dimensions and
installation at the end of these
operating and installation instructions.
The lamps are approved for building
into furniture in accordance with VDE
0710 Part 14/04.82 (BS 7671 in the UK).
a Building-in aperture, with sufficient
space for the transformer.
b Building-in aperture, for situations
where the transformer is to be fed
through one of the cut-outs for the
lamps.
 The lamps are connected to the
distributor c of the transformer. The
bridge connectors supplied d must
be inserted into any unused
connections.
The transformer must not be
connected to the electricity supply
until the lamps have been connected
to the transformer.
Otherwise the lamps might be
damaged or broken.
Cleaning
 Only use a mild cleaning agent and a
soft cloth for cleaning.
6

Technical data

Primary side:
230 V AC, 50-60 Hz
Secondary side:
350 mA constant, max. 56 VDC
Ambient temperature:
50 °C maximum
Disposal of your old appliance
Electrical and electronic appliances
often contain valuable materials. They
also contain materials which, if handled
or disposed of incorrectly, could be
potentially hazardous to human health
and to the environment. They are,
however, essential for the correct
functioning of your appliance. Please
do not therefore dispose of it with your
household waste.
Please dispose of it at your local
community waste collection / recycling
centre or contact your Dealer for
advice.
Ensure that it presents no danger to
children while being stored for disposal.