1
PRECAUTIONS – WARRANTY
The CRISTEC equipment includes the following:
• A box containing a solar regulator electronic function.
• This user manual
•
Specific packing
This document applies to solar regulator from the YPOWER range as listed on the cover (available in colour on our
website www.cristec.fr).
The manual is intended for users, installers and equipment maintenance staff. Please read this manual carefully before
working on the regulator.
This manual should be kept safely and consulted before attempting any repairs because it contains all the information
required to use the appliance.
This document is the property of CRISTEC; all the information it contains applies to the accompanying product.
CRISTEC reserves the right to modify the specifications without notice.
1.1 P
RECAUTIONS
Material class I according to NF EN 60335-2-29 standards.
The requirements for installation are contained in the NFC 15-100
standards.
The installation must be carried out by an electrician or a
professional installer.
It is essential not to install, repair, start any maintenance or
cleaning on this device when under voltage. All input and
output power sources must be turned off, or isolated: MPPT,
alternator, or any other equipment. The batteries must be
isolated by the battery disconnect switches according to the
standard in force.
This appliance is not intended for use without supervision by
children or by persons with reduced physical, sensory or
mental capabilities, or lacking in experience and knowledge. If
they are properly supervised and if instructions relating to the
use of the device in complete safety have been given to then,
(
) –
WARNING
PROVISIONS RELATING TO SAFETY
24