Assembly Instructions - Kobalt 19137 Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. If you plan to stack the chest onto the
cabinet (Item #5071909, sold
separately), please follow the below
step. Otherwise, forget this step.
Remove the cabinet mat, unload the
bottom drawer from the chest and the
top drawer from the cabinet using the
method on Operating Instructions
(Page 7). Insert M8 x 25 mm bolts
(packed in the cabinet) from the bottom
of the chest into the top of the cabinet
and tight with M8 nuts (packed in the
cabinet). Install the 2 unloaded drawers
back using the method on Operation
Instructions (Page 7).
Hardware Used
M8 x 25 mm Bolt
M8 Nut
1
x 4
x 4
6