Disposal; Spare Parts And Accessories - Holex 967260 Instrucciones De Uso

Welding and brazing work:
Since the anvil and also the clamping faces of the jaws have been carefully
surface hardened, when performing welding or brazing work on workpieces
clamped in the vice take great care that the welding/brazing flame does not
cause loss of hardening of these surfaces.
If necessary, cover the anvil or clamping faces with flame-proof or heat-resistant
materials.

5. DISPOSAL

ɽ Dispose of the vice and all accessory parts in accordance with local regulations.

6. SPARE PARTS AND ACCESSORIES

Spare parts:
obtainable from the Hoffmann Group:
www.hoffmann-group.com
Accessories:
Swivel base, spare jaws, soft jaws are available, see the
Hoffmann Group "Workstations and storage" catalogue.
www.hoffmann-group.com
DE
EN
FR
IT
ES
13