Linea 2000 DOMO DO7317M Manual De Instrucciones página 38

DO7317M
Installation kit
1. feet
2. Wall mounting bracket
3. Screw for wall mount
4. Anchors for wall mount
5. lower wall mounting brackets
6. Screw M3 x 5
INSTALLATION
• Carefully remove all parts from the packaging and remove all the packaging
materials from the parts (plastic bags, foam,...) Check for possible damaging of
the appliance, that may have happened during transportation. If anything has been
damaged or if a part is missing, contact your dealer. Keep the original box to store
the heater when it is not being used.
• Make sure that the appliance is switched off before plugging in the heater.
Caution: the socket has to be well grounded.
• use the handle to move the heater.
• When the heating is mounted to the wall, we recommend to place the heating
at least 30cm above the floor and 100cm below the ceiling. Also make sure you
leave a free space of 100cm before the front and next to the sides of the appliance.
7. Screw M3 x 8
8. Washer for screw M3 (6. + 7.)
9. Support for feet
10. Screw with washer M3 x 8
11. Screw with washer M4 x 8
1x
2x 2x
2x
38
4x
2x
2x
2x
4x
4x
4x