Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation of the feet
1. Screw the support (9) onto the
feet.
2. Screw the two feet onto the
heater.
Wall mount
1. Drill 2 holes in the wall, 7cm
next to the side of the appliance
and 100cm above the floor.
place 2 plugs (4) into the holes,
using a hammer. fasten the
wall mounting bracket (2) in
the plugs, using the matching
screws (3).
2. fasten the lower wall mounting
bracket (5) to the back of the
appliance, using the matching
screws (6).
3. place the appliance on top
of the upper wall mounting
bracket. Now you can mark the
lower wall mounting bracket
onto the wall with a pencil.
Remove the appliance and
drill 2 holes for the lower wall
mounting bracket in the place
39
DO7317M
Publicidad
Tabla de contenido
