Warranty And Limitations Of Liability - Beem YD-3368 Manual Del Usuario

19
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem yourself.
If the problem cannot be solved with the steps that are listed, contact our customer service
department.
Do not attempt to repair an electrical device yourself!
Problem
The device cannot
be switched on. / The
grinder (1) does not
start the grinding
process.
The fuse in the fuse box
is triggered.
During use, an
unpleasant smell is
detected.

Warranty and Limitations of Liability

The warranty does not cover faults caused by incorrect handling, damage or attempted repairs.
The same applies to normal wear and tear.
We do not accept any liability for damage or consequential damage resulting from:
• failure to follow the operating instructions
•
non-designated use
• improper or unsuitable handling
• repairs which are not carried out properly
•
unauthorised modifi cations
•
use of outside parts or spare parts
• use of unsuitable additional parts or accessories
Keep the original packaging during the warranty period of the device so that the device
can be properly packaged up if it needs to be returned. The warranty claim will lapse if any
damage is caused during transport.
Possible cause
The mains plug is not inserted
correctly in the plug socket.
The plug socket is defective.
There is no mains voltage.
Too many devices connected to
the same circuit.
The device is being used for the
fi rst time.
Fix
Correct the fi t of the mains plug.
Try another plug socket.
Check the fuse of the mains
connection.
Reduce the number of devices in
the circuit.
A smell often develops when
new devices are fi rst used. The
smell disappears once the device
has been used several times.
EN