Publicidad
Idiomas disponibles
Idiomas disponibles
ENG ORIGINAL INSTRUCTIONS
MAINTENANCE.
The circular saw has been designed for a long
working life with minimum maintenance. Optimum
use depends on correct care of the circular saw
and regular cleaning. To prevent accidents, always
unplug the circular saw from the power source
before cleaning or performing any maintenance.
The circular saw may be cleaned effectively using
compressed air after each use. If compressed air is
not available, use a brush to remove dust from the
circular saw. Motor ventilation vents and switch levers
must be dept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objects through
openings. Cetain cleaning agents and solvents
damage plastic parts, among them are gasoline,
carbon tetrachloride, chlorinated cleaning solvents,
ammonia and household cleaners containing
ammonia. Do not use any of these to clean the
circular saw. Should excessive sparking occur, have
a Werku
official repair service exam and/or replace
®
the carbon brushes.
ENVIRONMENT PROTECTION.
The materials and components that have been
used to manufacture this product can be re-used
and recycled. Werku
Management System that is in charge of the correct
elimination of the residues of this product. Do not
eliminate this product with domestic residues.
Werku
offers to its clients a free collection service
®
of these residues through any of its sale points, or in
the collection points established by the Integrated
Management System or in the recycling point of
your locality.
WARRANTY AND TECHNICAL SERVICE.
Werku
offers a warranty that covers the repair
®
of all defects found due to faults in the materials
or manufacture. For this cover to be effective it is
necessary for these defects to appear within the
validity period. The consumer is entitled to free
repair of all defects (shipping costs, labour costs
and materials included), either via the repair or by
replacement (if necessary, with a later model). In
any case, Werku
will not accept replacements if
®
these represent a disproportionate cost compared
to the cost of repair. This warranty does not affect
consumer's rights established by European or
national laws. The validity period of this warranty
is 3 years. The validity period starts on the date of
purchase by the first consumer. This date is shown
is adhered to an Integrated
®
on the invoice or receipt of purchase. Any claims
arising from this warranty must be presented to
the Werku
Assistance Service. To do so you must present
this warranty correctly completed and stamped by
the distributor, together with the sales invoice or
receipt. To require any information in relation to this
warranty, the buyer and/or distributor may contact
the Technical Assistance Service by telephone
on +34 981 648 119, or by e-mail at info@werku.
com. This warranty does not cover defects caused
by parts that have worn out from use other types
of natural wear, defects caused by failure to
observe the instructions for use and operation,
or for applications other than those for which this
product is intended, abnormal environmental
factors, overloading, or unsuitable maintenance or
cleaning, faults caused by the use of spare parts,
accessories or replacements that are not original
Werku
parts, if the product has been totally
®
or partially disassembled, modified or repaired
by personnel other than that of the Technical
Assistance Service or minimum and irrelevant
irregularities for suitable use or operation. Repairs
and replacements will not extend or renew the
validity period of this warranty. The replaced parts
will become the property of Werku
sends the product to the Technical Assistance
Service, and it fails to comply with the conditions of
this warranty, all expenses and transportation risks
shall be paid by the buyer. This warranty is only
valid within the territory of the European Union.
The company responsible for the compliance of
this warranty is Werku Tools SA.
TECHNICAL ADVICE.
The technical department of Werku
disposal to resolve any questions you may have
regarding to its products. If you wish to contact our
team, send an e-mail to info@werku.com.
6
English
distributor or the Werku
®
Technical
®
. If the buyer
®
is at your
®
Publicidad
