ATTACHING TREKKING POLES
1.
Insert one end in the side pockets at the
bottom of the pack.
2.
Wrap the elastic hook clips around pole.
3.
Pull on the free end of the elastic to tighten.
ATTACHING A MOUNTAINEERING AXE
1.
Slide the handle of the tool down through the
mountaineering axe loop until the head of the
tool pulls on the mountaineering axe loop.
Note: Point the pick at the head of the
axe towards the zipper on the Kangaroo
pocket.
2.
Flip the bottom of the handle up towards the
top of the pack. Secure the handle with the
elastic hook clips.
3.
Pull the end of the elastic to tighten.
™
19