How to Prevent TV from Falling
1 Fix the brackets on the rear part of the product and on the wall as
shown in the picture. Secure the product brackets and wall brackets
at the same height.
2 Verify that the product brackets and wall brackets are firmly
fastened.
3 Using a strong cord, tie and connect the product brackets to the wall
brackets. When moving a product installed in this way, please untie
the cord first.
• Install the TV in the horizontal position only.
• It is safe to install the product according to the installation method
to prevent the damage to the product or personal injury even if the
product is pulled forward.
• Install the TV near a wall to prevent falls when pushed.
• The brackets, screws, and cords must be purchased separately as
they are not provided with the product.
2
How to Adjust the Height on Both Sides of the TV on
Floor Stand
• Loosen the screw halfway by using a Phillips screwdriver, adjust
the height on both sides of the TV as illustrated, and tighten the
screw.
CAUTION
• Do not place an object or step on the floor stand.
• Do not pull or push the floor stand.