Projector Settings; Network Setting - YABER Pro V8 Manual De Instrucciones

5.Projector Settings

Get a better viewing effect with appropriate settings. The main content of the
projection can be set in the following steps.
（1）If needs setting, first select "Settings" on the main screen, and then
press the "OK" key on the operation panel.
（2）"Network setting", "Bluetooth setting", "Projection Setting", "System
Update", "General Setting" can be set. "System Info" can be obtained. Press
the and ">" on the operation panel to select the range of settings.

5.1 Network Setting

1.Move the cursor to the "WIFI" icon and press OK to enter the WI-FI setting
interface.
2.Press "OK" on the "wifi ON/OFF" option to turn on and off the wifi function,
as shown in the figure below.
3.After turning on the wifi function, the projector will searche for wifi hotspots
automatically.
4.Select your WIFI to make sure that the projector connect to the same wifi to
your phone. Press the "∧" and "∨" on the operation panel to select the
correct WiFi. Press the "OK" key to enter the password page.
Support@yabertech.com
17 17 17 17 18 19 19
91
19 17 19 20
EN
91
47 46 46 46 46 46
20 20 20 20 20 20 20
46
20 20 2