Cudy RE1800 Manual Del Usuario página 5

2. Then below window will pop up, Use admin for password to
log in.
http://cudyre.net/
Note: If the login window does not appear,Launch a web browser, and
enter http://cudyre.net/ or http://192.168.10.254/ in the address bar. Use
admin for password to log in. If still not work, please refer to FAQ > Q1.
Select Wireless Extender,then click Next.
1
Mode Host Network
Opertion Mode
Exit
Auto
Password
Log In
2
3 4
Extended Network Summary
Wireless Extender
Access Point
Next
— 5 —
3. Follow the step by step configuration to the end. After
configuration, below page would pop up.Then wait the
turns solid ON, it may take 1 or 2 minutes.
Please connect to the new network.
Note: Please check the information on the screen and confirm that the password
is the same as the wifi password of the router. Otherwise, the extender will not be
able to connect to the router WiFi.
4. Relocate the extender halfway between your router and the
WiFi dead zone, find a good place to plug it according to the
LED.
Router
Host WiFi Network
Red Flash:
Connecting / not connected to host Wi-Fi
Solid Red: Connected, signal is weak
Solid Purple: Connected, signal is fair
Solid Blue: Connected, signal is strong
WLAN
XXXXXXXX-EXT2G
XXXXXXXX-EXT5G
xxxx-xx
xxxx-xx
XXXXXXXX-EXT2G
XXXXXXXX
XXXXXXXX-EXT5G
XXXXXXXX
Extender
Clients
Halfway Extended Network
— 6 —
LED