Frequently Asked Questions - Cudy RE1800 Manual Del Usuario

5. Connect your device to the extender using the extended SSID
and WiFi password that you've set during the configuration. The
default WiFi password is the same as your host WiFi network
(router WiFi).
LED and Button
LED Color Status
/
Off
Flash
Red
On
Purple On
On
Blue
/ Off
Flash
Blue
On
/ Off
Flash
Blue
On
Long press for
Reset
2 seconds
Press to
WPS
take effect
Indication
No host Wi-Fi configuration
Connecting / not connected to host Wi-Fi
Connected to host Wi-Fi, signal is weak
Connected to host Wi-Fi, signal is fair
Connected to host Wi-Fi, signal is good
Not connected to host Wi-Fi
WPS in progress
Connected to host Wi-Fi
No power
The system is booting or upgrading
System startup is complete
Press and hold Reset button for 2
seconds until all the LED lights turn on
and off.
Press the WPS button until WPS LED
start flashing.
— 7 —

Frequently Asked Questions

Q1: What can I do if the login window does not appear?
A1: If your computer is wirelessly connected, make sure that you
have connected to the extender's SSID.
A2: If your computer is connected via an Ethernet cable, please
make sure that the connection is stable.
A3: Make sure your computer is set to obtain an IP address and
DNS server address automatically.
A4: Verify that http://cudyre.net/ (or http://192.168.10.254/) is
correctly entered in the web browser and press Enter.
A5: Reset the device and try again.
Q2: What should I do if my handy can not find Wi-Fi signal?
A: Please make sure the device is connected, power on. If
everything is normal but still no signal, please try to use computer
to set, or restore the extender to factory settings. If after restoring
factory settings but still no signal, you can restart the extender, if it
still doesn't work, maybe the device has fault.
Q3: How to Reset to defaults?
A: While the power is still on, keep pressing the Reset button for
2 seconds, and wait for 1-2 minutes for it to restart.
— 8 —