Venga VG MAS 3003 Manual De Instrucciones página 6

BEFORE FIRST USE
• Charge your massage gun using only the original charge adaptor.
When plugged in and charging, the LED lights blink regularly.
• When the number 99 is displayed on the screen the massage gun is fully charged.
A full charge will take 3 to 4 hours.
• The massage gun can't be used during battery charge.
HOW TO USE YOUR MASSAGE GUN
•
Select the desired massage head accessory and install it onto the massage head
attachement
- Soft ball head for large muscle groups (arm, back, thigh, calf, ...)
- Air cushion head for delicate spots (reduce the vibration strenght)
- Conical head for deep tissues (meridian joints, palms, soles, ...)
- Y-shaped head for tight areas (neck, spine, Achilles tendon, ...)
Golden finger head for relaxation of various muscle parts
-
Flat head for relaxation of various muscles parts
-
•
Start the massage gun by pressing the On/Off button on the control screen for 2
seconds.
•
Select the desired massage speed (1-9) by pressing the On/Off button
- Speed 1 is the lowest vibration setting
- Speed 9 is the highest vibration setting
•
Position the massage gun head perpendiculary to the chosen muscle area and gently
press for maximum 60 seconds.
After 60 seconds, remove the massage head from the skin and take a break of min 30
seconds before using on the same spot.
•
A full charge provides 5 to 6 hours of working power to the massage gun.
The LED lights will start flashing to indicate that the battery is running low.
Regularly check the battery level on the control screen.
When the battery is empty, the massage gun stops working and shuts off.
• When finshed, shut off the massage gun by pressing the On/Off button for 2 seconds,
and let it cool down.
Notes:
•
Always use on clean and dry skin.
•
Do not use the massage gun on your head, face or on parts without muscle coverage.
•
If you experience pain or discomfort, stop using the massage gun immediately.
•
Always shut off the massage gun before changing the massage head.
VG MAS 3003 6