Transport And Storage; Safety - Wiha 45221 Manual De Instrucciones

Transport and storage

Please keep the original packaging for later transport, e.g. for calibration. Any transport
damage due to faulty packaging will be excluded from warranty claims.
Instruments must be stored in dry and closed areas.
In the case of an instrument being transported in extreme temperatures, a recovery
time of minimum 2 hours is required prior to instrument operation.

Safety

The phase rotation indicator has been constructed and verified in compliance
with the latest safety standards for Test Instruments IEC/EN 61010-1, IEC/
EN 61010-031 and IEC/EN 61557-7 and have left the factory in safe and
perfect conditions.
In order to avoid electrical shock, the valid safety and VDE regulations regarding
excessive contact voltages must receive utmost attention, when working with
voltages exceeding 120 V (60 V) DC or 50 V (25 V) rms AC. The values in
brackets are valid for limited ranges (as for example medicine and agriculture).
Prior to usage ensure perfect instrument function. The instrument may only be used
within the operating ranges as specified in the technical data section.
If the operator's safety is no longer ensured, the instrument is to be put out of service
and protected against use.
EN
15