CHARGING
•
The vacuum cleaner can only be charged with its original charger.
•
A full charge takes approximately 4 to 5 hours.
•
Operating time at full charge is around 35 to 40 minutes on low power and 20 to 25
minutes on high power.
•
When you plug in the charger, the indicator light will blink red.
•
When the device is fully charged, the indicator light turns blue, meaning that you can
unplug the adapter from the socket.
•
You can charge the battery pack separately or assembled into the unit.
CLEANING
•
To empty the dust cup, remove the accessories and push the dust cup bottom
opening button. It is recommended to empty it after each use.
•
After emptying the dust cup, take out the filter set and rinse it under clean water.
Be careful not to tear or deform the filter while cleaning it.
•
Remove the hair and dust from the floor brush after each use.
Note: make sure you let all parts dry completely before reassembling.
TROUBLESHOOTING
Problem
The unit won't start.
Low suction power
The unit does not
charge
Short operating time
VG HVC 3000
Possible reason
•
The battery is dead or not
connected correctly.
•
The main body and brush
are not connected
correctly.
•
The dust cup is full.
•
The filter is blocked by dust.
•
The brush or the tube is
clogged.
•
The charger is not
connected properly.
•
The charger is damaged.
•
The unit won't charge fully.
Solution
•
•
•
•
•
•
•
8
Charge the unit.
Assemble the parts
correctly.
Clean the dust cup
and the filter.
Remove whatever is
clogging the brush or
tube.
Plug in the charger
correctly.
Contact the after-
sales service.
The battery is too old:
contact the after-
sales service.