Better Homes and Gardens BH19-D1-1011-01 Instrucciones De Montaje página 4

C
1/4" x 5/8" Bolt
(12 used in this step)
assemble. To avoid causing damages to the thread, DO NOT over-tighten the bolts.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Position the Table Top (A) upside down on a level and protected surface.
3. Attach the four Aprons (B and C) to the Table Top (A) by inserting twelve 5/8" Bolts (1) with Lock
Washers (2) and Flat Washers (3) through the metal tabs and screw into place.
bolts.
Assembly Instructions
B
B
A
Lock Washer
(12 used in this step)
①
DO NOT fully tighten the bolts initially until all the bolts are ready to
C
②
4
1
2
3
B
A
Flat Washer
(12 used in this step)
③
fully tighten the
DO NOT
C