Function Key; Power Off; Bluetooth Pairing - Targus AEM105 Guia Del Usuario

Function key

A
B
C
D
E
A. Bluetooth
F
B. Volume+
C. Volume-
G
D. Mic
E. Call
F. Power LED
G. Power
H. USB-C Port
H
4
Operating Instructions
Operation Press and hold power button for 2 seconds.
Description Press and hold power button for 2 seconds to turn on the speakerphone.
Note When the speakerphone is on the LED near the power button and the volume – and volume + will be white. The
Bluetooth LED will flash red and green while in pairing mode and stay green once paired. The microphone LED
will be green.
Operation Press and hold for 2 seconds.
Description Press and hold power button for 2 seconds to turn off the speakerphone.

Bluetooth pairing

Operation The speakerphone will automatically enter Bluetooth pairing mode when powered on. You can also manually
enter Bluetooth pairing mode by pressing and holding the Bluetooth LED for 2 seconds.
Description The Bluetooth LED will flash red and green while in pairing mode along with the voice prompt "ready to pair". The
speakerphone will automatically reconnect to previously paired devices within range. If not previously paired,
activate pairing in the Bluetooth menu of your device and select TARGUS AEM105.
When devices are disconnected manually or out of range the speakerphone it will automatically enter pairing mode
along with the voice prompt "ready to pair". If a new connection is not successful after 1 minute the speakerphone
will go into standby mode. After 5 minutes in standby mode the speakerphone will automatically turn OFF if there
is still no connection.
Note The Bluetooth LED will flash red and green while in pairing mode and stay green once paired.
Wired connection and charging
Operation Connect the USB cable to your device or charger.
Description Connect the USB cable to your device to enable the optional wired connection. Connecting the USB cable to a
charger or device will also charge the speakerphone.
Power ON

Power OFF

5