EVGA CLCx Serie Guia De Instalacion página 10

The LCD display orientation can be rotated via "EVGA CLCx" software.
Cable Connections
The CLCx includes additional cables, part N and
CLCx software.
• Connect cable part O to the CLCx, then connect the SATA power cable to the SATA power cable from
your power supply.
• Connect the MB Fan PWM to the 4pin CPU_FAN or AIO_PUMP header on your motherboard.
• Connect cable part N to the Fan PWM on cable part
connectors on cable part .
N
• Connect each of the ARGB from the fans to each other and then connect the end to the Fan ARGB on
cable part .
O
M EVGA ARGB Fan O 16 Pin 1-to-4 Cable
ARGB Cables MB fan PWM
FAN PWM Cables FAN PWM
FAN ARGB
N PWM Fan Splitter
SATA Power
O required for RGB and fan control through the
O then connect the fans to each of the
Full Control with EVGA CLCx Software
Important Information
EVGA CLCx CPU Closed Loop Water Cooling Kit is an AIO (All-In-One) cooling system. With AIO Water
Cooling Systems, you do not need to add any coolant, and the system is completely self-contained. All
EVGA CLCx CPU Closed Loop Water Cooling Kits are leak tested at the factory, and are ready to install when
received.
Warranty for the EVGA CPU Closed Loop Water Cooling Kit
Your EVGA CLCx CPU Closed Loop Water Cooling Kit comes with a 5 (five) Year Limited Warranty. Refer to
your motherboard's warranty information before installing the EVGA CLCx CPU Closed Loop Water Cooling
Kit. Should you damage your motherboard during the installation process, EVGA will not be held liable for
the physical damage of your EVGA CLCx CPU Closed Loop Water Cooling Kit, case, motherboard or any
associated hardware when damage is caused by improper installation.