Parts Description - Makita CW002G Manual De Instrucciones

PARTS DESCRIPTION

► Fig.1
1 USB power supply port
3 Control panel
5 Opener
7 Drain
9 Upper cover
11 Battery cover
13 Filter cover
15 Wheel
17 "DC IN" socket
19
Cool/heat switch button
21 Battery indicator
23 Lamp of "DC IN"
25 Lamp of heating mode
OPERATION
CAUTION:
Do not put things that are easily
perishable in the chamber when the appliance in
heating mode. The food or drink may rot.
NOTE:
When operating the appliance in high humid
environment, dew condensation may occur on the
appliance. This is not malfunction of the appliance.
Use a dry cloth to wipe the dew condensation off the
appliance.
1. Connecting the power supply
A) Battery
CAUTION:
Always switch off the tool before
installing or removing the battery cartridge.
CAUTION:
Hold the appliance and the battery
cartridge firmly when installing or removing
battery cartridge. Failure to hold the appliance and
the battery cartridge firmly may cause them to slip off
your hands and result in damage to the appliance and
battery cartridge and a personal injury.
CAUTION:
Be careful not to pinch your finger
when opening or closing the battery cover.
CAUTION:
Be careful not to pinch your
fingers between the battery cartridge and the
terminals. It may cause slash injury.
To install the battery cartridge, open the battery cover.
Align the tongue on the battery cartridge with the groove
in the housing and slip it into place. Insert it all the way
until it locks in place with a little click.
Then close the battery cover.
To remove the battery cartridge, slide it from the appli-
ance while sliding the button on the front of the cartridge.
► Fig.2 1. Red indicator 2. Button 3. Battery cartridge
2 LED lamp
4 Tray
6 Handle
8 Carrying Handle
10 Battery cover hook
12 Upper cover hook
14 Air vent
16 "DC IN" socket cover
18 Power button
20 Temperature display
22 Temperature setting button
24 Unit of temperature
26 Lamp of cooling mode
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the appliance, causing
injury to you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
NOTE: Up to two battery cartridges can be installed,
although the appliance uses one battery cartridge for
operation.
B) AC adaptor (Only use for
recreational vehicle)
Optional accessory
When using the appliance with AC power, use the AC
adaptor supplied with the appliance. Insert the plug to
"DC IN" inlet of the appliance and then insert the other
end to an outlet.
When the appliance is operating with power from AC
adaptor, the lamp of "DC IN" lights up.
C) Cigarette lighter adaptor
When using the appliance with the cigarette lighter socket,
use the cigarette lighter adaptor supplied with the appli-
ance. Insert the plug to "DC IN" inlet of the appliance and
then insert the other end to the cigarette lighter socket.
When the appliance is operating with power from cigarette
lighter adaptor, the lamp of "DC IN" lights up.
CAUTION:
Insert the plug completely into the
"DC IN" inlet. Failure to do so may deform the plug
or cause a fire.
CAUTION:
Always close the "DC IN" socket
cover firmly when the power cord is not plugged.
Otherwise foreign matter may enter the appliance and
cause a malfunction.
NOTE: When the appliance shifts power supply, the
compressor will stop for about 3 minutes to protect the
compressor.
NOTE: After turning off the appliance, it takes about 3
minutes to restart the compressor because of the pro-
tection of the compressor.
NOTE: If the appliance stops by any means other than
pressing the power button, the appliance turns on
automatically when the power supply of the AC adaptor
or the cigarette lighter adaptor is regained.
2. Turning on the appliance
Press the power button to turn on the appliance. Press
the power button again to turn off the appliance.
3. Switching cooling / heating mode
Press the cool / heat switch button to switch the
operating mode.
• When the appliance operates in cooling mode, the
lamp of cooling mode lights up.
• When the appliance operates in heating mode, the
lamp of heating mode lights up.
The temperature display flashes the control temperature.
9 ENGLISH