Operation - Wilfa HS1-SB Manual De Instrucciones

OPERATION

EN
• Press the power button to start.
• After switching the vacuum cleaner on, press the speed regulation button to
adjust the speed. The speed will go from Auto-High-Medium-Low.
• When using the Auto level, the dust sensing function is enabled. After sensing
dust, the background animation on the display will change from blue to
purple. If no dust is detected, the animation remains blue, and power will run
on low.
• The battery time is indicated by a circle on the display, divided into 6 sections.
As the battery is consumed the circle will lower section by section. When the
battery is low, the display shows "Low Power".
INSTRUCTION MANUAL · INNOVAC SENSOR
Speed regulation
Power button
Display
8