Troubleshooting - Wilfa HS1-SB Manual De Instrucciones

TROUBLESHOOTING

Problem Possible reason
Three indicators Rolling brush is tangled
flash by hair.
The ambient temperature
for operation is too high
or too low.
Electric floor Large pieces of waste
brush is not have been engaged.
working
The rolling brush has been
tangled with hair.
Operation Battery aging
duration
becomes shorter The ambient temperature
for operation is too high
or too low
The battery is not fully
charged
Suction force is The filter sponge of the
weakened dust cup is blocked
The suction inlet of the
floor brush or accessories
is blocked
The filter components
are not fully dried after
washing with water
CORDLESS VACUM · HS1-SB
Solution
Remove hair or any foreign
object stuck in the rolling
brush.
Use the vacuum cleaner in the
proper environment.
Disassemble the electric floor
brush and remove the waste.
Remove the rolling brush
from the electric floor brush
and remove the hair from the
brush.
Contact customer service
Make sure the vacuum cleaner
is not placed in the sunlight if
it is too warm, and make sure
doors and windows are closed
if it is too cold.
Charge the battery
Clean the filter sponge
Remove the objects blocking
the suction inlet
Make sure the filter
components are fully dried,
and assembled in the correct
way
15
EN