Troubleshooting - Oster OS-WSMD18S Manual De Instrucciones

1. Common non-fault phenomenon
When the washing machine is used for the first time, there may be a small
amount of water flowing out of the drain pipe. This is the residual water when the
factory performance is tested.
In the process of washing or rinsing, water inflow sometimes occurs. This is due
to the automatic replenishment of the water level.
Washing machine setup When the rinsing program is started, no water is
injected. The default rinsing program for the washing machine starts with drainage
and dehydration.
After the dehydration starts, the dehydration barrel stops when it is time, which is
the intermittent dehydration set to achieve the dehydration effect.
In the middle of dehydration, water rinsing phen
because the balance of the clothes is automatically corrected when the clothes are
dehydrated.
Delayed dehydration after the water is finished. This is the default setting of the
washing machine.
The key operation is invalid dur
setting of the washing machine. It needs to be paused before it can be operated.

TROUBLESHOOTING

ing the laundry process. This is the default
13
omenon sometimes occurs