Oster OS-WSMD18S Manual De Instrucciones página 32

2. Common default and solution
Problem Display
No display
Totally no
No display
working
No display
There is no
display when
the voltage is
too low, or the
fuse may be
open when the
voltage is too
high.
Poor E1
drainage
Not E2
dehydrated
Dehydration E3
touch the
shell
Insufficient E4
water
injection
Reservation E5
Cause
The power plug is not plugged
in and the power switch is not
pressed.
The outlet has no electricity or
the fuse is broken.
The power outage causes the
program to disappear and the
operator must operate it again
after the call.
The voltage is too low or too
high.
The outlet of the drain pipe is
too high or blocked, resulting in
the water not being discharged
after 5 minutes
No cover when washing (pause
and alarm) or dehydration
(cover and alarm)
Because the laundry unevenly
touches the shell when it is
unbalanced during the
dehydration, the washing
machine will automatically
correct it, and if it is still invalid
after two times, it will alarm.
The faucet is not on, the water
is stopped or the water
pressure is low. After 16
minutes, the water level is less
than the set water level.
Reservation for open the cover
14
Solution
Plug in the power plug and press
the power switch.
Ask an electrician to check the
socket or fuse.
After starting the call, press again
to operate each press.
Unplug the power plug and wait
until the voltage is normal
After checking the drain and
rectifying the fault, open the cover,
close it, and re-enter the drain.
Cover the cover.
Open the top cover, place the
clothes manually and close the
cover.
Open the tap or wait until the water
pressure is normal before use.
Open the cover, close the cover,
and re-enter the water inlet
process.
Close the upper cover