JANE Flip 6626 Instrucciones De Uso página 5

B – FITTING THE BATH TUB
Insert the free end of the drain hose into the outlet hole underneath the bath tub.
Place the end of the drain into the support hole on the side of the bath tub.
Place the bath tub on the frame resting it on the centring points (*).
Press the front part of the bath tub down until your hear the locking CLICK.
To unlock the bath tub, pull the bottom central button
C – LOCKING THE CHANGING TABLE ONTO THE BATH TUB
Release the 2 side rubber strips on the rear legs
Position the changing table on the bath tub and lock it into place by tting the 2 rubber strips into the 2 lower plastic supports underneath the frame.
D – CLOSING THE FRAME
Remove the bath tub and unlock the tray by simultaneously pressing the 2 catches on both sides underneath the tray.
Lift the tray and fold the frame by bending the side bars until the front legs meet the rear legs. Transfer the changing table to the other side.
OPEN
OPEN
MAXIMUM WATER LEVEL
GUARANTEE INFORMATION
- This item is guaranteed against manufacturing defects as stipulated in the legal Directives and/or regulations in force on guarantees for consumer goods applicable to the
European Union and those of the country in which it is marketed.
- It is essential to present the purchase invoice or receipt in order to process the guarantee through the seller of the item or, failing that, through the manufacturer.
- The guarantee excludes anomalies or faults caused by misuse, non-compliance with the safety regulations and instructions for use and maintenance provided, or due to wear
and tear caused by normal use and regular handling of the item.
- The label containing the serial number of your model must not be torn o under any circumstances as it contains information relevant to the guarantee.
"OPEN" outwards and lift the bath tub.
WARNING
DROWNING
can occur very quickly and in very shallow water (± 2 cm), this product does not
provide any extra safety against the danger of water and children have DROWNED in bathtubs.
MAINTENANCE
Keep metal parts clean and dry to avoid oxidation.
To clean plastic parts, use only mild detergent and warm water.
5
CLICK CLICK
OPEN
OPEN
2
1