IMPORTANT SAFETY INFORMATON
WARNING
Read and understand all instructions and safety information in this manual
before operating or servicing this bender.
FAILURE TO OBSERVE THESE WARNINGS COULD
RESULT IN SEVERE INJURY OR DEATH.
WARNING
– Personal Safety Hazards
when using this bender.
alcohol, or medication.
is tipped.
bender is in use.
fall if not properly supported.
FAILURE TO OBSERVE THESE WARNINGS CAN
RESULT IN SEVERE INJURY OR DEATH
3
GROUNDING INSTRUCTIONS
DANGER
– Electrical Shock Hazards
ground-fault protected circuit only.
down, an electrical ground provides a path of least resistance for the
electric current. This path of least resistance is intended to reduce the
risk of electric shock. This bender's electrical cord must have a
grounding conductor and a grounding plug. Do not modify the plug.
Connect the plug to a corresponding receptacle that is properly installed
and grounded in accordance with all national and local codes and
ordinances. Do not use an adapter.
in a risk of electric shock. Check with qualified electrician or service
personnel if the grounding instructions are not completely understood,
or if in doubt as to whether the bender is properly grounded.
FAILURE TO OBSERVE THESE WARNINGS CAN
RESULT IN SEVERE INJURY OR DEATH
WARNING
– Entanglement Hazard
checking to see that all tools are removed from bender before turning it on.
FAILURE TO OBSERVE THESE WARNINGS CAN
RESULT IN SEVERE INJURY OR DEATH
4