Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Place the indicator plate into
the hole and assemble the
orientation in position with
three screws. This position is
marked on the indicator plate.
Caution:
3.
The indicator plate must be
aligned with the left edge, the
right edge and the front edge.
4.
The orientation is shown fixed
as picture 3.
5.
Insert the microwave in the
hole. Please pay attention to
leave the same space on the
left and right side of the
cabinet. And make sure that
the orientation is inserted
into
the
microwave.
back
of
the
30
Publicidad
Tabla de contenido
