Bosch PMF 1232 Instrucciones De Uso página 8

6
● Serious diabetes,
● Skin ailments or injuries, particularly open
wounds
● Inflammation of the feet or lower legs
● Vein conditions, thrombosis or varicose
veins
● Bruises or pain in the feet, legs or joints
● TB or cancers
The appliance must not be used without
consulting a doctor in advance.
Use of the foot spa is not a substitute for
therapy carried out by a physician.
Application
General
The gentle oscillations and the bubbling
water relax muscles and reinvigorate tired
feet.
The infrared heat source enables the
targeted warming of a specific area of the
foot.
The attachments supplied and the massage
rollers pamper and massage the feet.
A session should not last longer than
15 –20 minutes.
Sit down during use, and under no
circumstances stand up with your feet in
the spa!
The appliance is not designed to take the
full weight of the user.
Use
The appliance must not be connected to the
power supply during filling or emptying.
● Uncoil the lead and place the foot spa on
the floor in front of a chair.
● Plug in the lead and check that the
appliance is switched off. Ensure no LED
indicator is lit.
● Unplug the appliance once again and fill
with warm water up to the
● Reconnect the lead.
● Sit down and place the feet in the foot
bath 1, ensuring you are in a comfortable
position.
Robert Bosch Hausgeräte GmbH
~
mark.
● Switch the appliance on with buttons 5, 6
or 7 and pamper your feet (max. period of
use approx. 20 min).
– Button 5 switches on the vibration
massage and the infrared heat 8
– Button 6 activates the water stream
massage in the center of the unit
– Button 7 starts the bubble function, and
switches on the heating to keep the
water warm. It is not possible to heat up
cold water by this method.
● Switch off the appliance when you have
finished bathing your feet. To switch off
the selected function, press the button
concerned once again.
● Remove the feet from the foot bath and
unplug the lead. Lift the appliance by the
indented grips  and pour out the water
via the cutouts.
Info: The buttons with the various functions
can also be combined as desired for
optimum massage. The indicator light
above each button lights up when this is
switched on.
Tip: To ensure special relaxation and care
for the feet, a non­foaming, non­oily care
preparation can be added to the water.
Use of accessories
Affix the desired attachment a, b or c to the
adapter 9.
The soles of the feet can be massaged
using the massage brush a and the
massage ball attachment b.
The "pumice stone" attachment c is suitable
for the gentle removal of hardened skin.
● Treat the particular part of the foot with
the appropriate attachment.
Tip: Flakes of dead skin can be readily
removed with the "pumice stone" after a
foot bath, when the skin is very soft.
en