ClearSounds CSC 600 Manual Del Usuario página 14

CaLLer ID SyStem operatIon
Subscription to Caller ID service from your local phone company is required.
New Calls/Messages waiting indicator
The red indicator light will flash to indicate that you have new calls/
messages have been reviewed.
review your Caller ID records
Use the or arrow button to scroll through the Caller ID list. At
the end of the caller ID record list, you will see the "END oF LIST"
message on the LCD. press the or button to continue.
Save Call records
Save specific calls by deleting old or unnecessary Call Records.
NOTE: Your phone stores up to 99 call records before the
memory becomes full. When the next call comes in, the oldest record
automatically drops off to make room for new call records.
using the Call Back feature
Call back a previously dialed number: The CSC600 can store up to 30
previously dialed numbers.
In the on-hook mode, press the DIAL button once, then use the or
button to select the number you want to Call Back.
pick up the handset or press SpEAKER button to dial the number.
Calling Back a number from your Caller ID list.
The CSC600 can store up to 99 call records on the Caller ID list.
1 Lift the handset or press the SpEAKER button, wait for a dial tone.
2 Select the incoming number that you want to call by pressing the or
button.
3 When the number you want to call appears on the LCD, press the DIAL button
oR
You can select the desired number by using the or button, then
pick up the handset or press the SpEAKER button to dial it out.
oR
You can select the desire number by using the or then you
can add or remove a 1 from in front of the number. For example if
the number on your caller ID screen is 800-965-9043, press the
# button to change it to 1-800-965-9043. or if the number is
1-987-654-3210, press # button to change it to 987-654-3210.
14 – ENGLISH